10.1 Configuration of human interface devices (HID)

This dialog box allows to configure the human interface devices (mouse and joystick) that you can use to control VEGA ZZ main functions. It can be shown by selecting Tools HID configuration in the main menu.

 

10.1.1 Joystick configuration

VEGA ZZ can manage more than one joystick and the its functions can be customized in easy way.

 

Joystick function assignment

 

In Device combo-box, you can select the joystick connected to the PC. The software can use USB and bus devices in the same manner. The Configuration tab allows to assign the main VEGA ZZ functions (rotation, translation, scale, etc) to the joystick controls (buttons and analogic sticks), clicking the function box by left mouse button (it appears flashing) and moving or pushing the joystick controls. To revert to the pre-defined configuration, press the Default button.

 

Joystick parameters

 

In the joystick Parameters tab, you can adapt the software response to specific hardware functions of the joystick. The Sleep time (in milliseconds) parameter controls the joystick / USB port sampling frequency. Higher values reduce the sampling frequency and the joystick response. Lower values increase the joystick response but the software spend more time to manage the device (more CPU use). The Axis threshold allows to change the neutral position sensibility of analogic sticks. This is very useful, because some devices have uncertain centre return of the sticks. The sensibility parameters change the sensibility of the software functions in relation to the device movements. The Default button restores the factory settings.

 

Joystick capabilities

 

The Capabilities tab shows the capabilities of the selected joystick.

 

Joystick test

 

The Test tab allows to test the controls of the selected joystick.

 

10.1.2 Mouse configuration

In the Mouse tab, the user can change the mouse capabilities and test them.

 

Mouse configuration

 

More in detail, you can change the rotation, the scale and the mouse wheel sensitivity. The Default button reverts to the standard configuration.